When the battery is in seriously low condition, Lockly™ will make continuous beeping sounds in addition to the flashing low battery icon on the touch screen. You should replace batteries immediately to avoid your smart lock from shutting down.

Low Battery: Battery Icon on the display keypad will light up to indicate low battery.

Solution: Replace batteries immediately to avoid battery failure. Lockly™ can still operate up to 300 cycles in low battery condition.

Dead Battery: When there is no display and no sound; screen is non-functional. Lock does not respond to app.

Solution: Replace batteries immediately. Supplied physical backup keys can be used to unlock the door. Alternatively, use a 9V battery as shown below to temporarily activate the lock.

Your Lockly™ will automatically detect battery polarity. So hold your 9V battery lead in place against bottom of the Lockly™ to temporarily activate the screen to enter your Access Code. Be sure to hold the 9V battery against the contact points located at the bottom of the lock until you have successfully unlocked your door with your Access Code. Once unlocked, batteries should be replaced immediately.